Best Bachelor's in Science, Technology, Engineering, and Mathematics (STEM) Educational Methods Programs in 2026
All 5 programs reviewed from the IPEDS database, ranked on graduation rate, affordability, and more. CIP 13.1213.
- In-state tuition typically runs from $7,231 to $56,545 a year, with a median near $22,054.
- 2 of 5 ranked programs sit at public universities.
- Most lead to an initial state teaching license, which means supervised student teaching plus a licensure exam (37 of 52 US jurisdictions use the Praxis series).
- We rank on graduation rate first, then selectivity and affordability, all from federal IPEDS data.
- 1
University of Kentucky
65score- 71%Grad rate
- $12,109/yrIn-state tuition
- $32,747/yrOut-of-state tuition
- 93%Admit rate
- 25,534Undergrads
- 4Grads/yr
- 1180SAT mid
- STEM Education
- AAQEP-accredited
- On-campus
About the programFuture science and math teachers at the University of Kentucky graduate with two majors, not one: the Bachelor of Science in Education in STEM Education pairs pedagogy with a full content area such as Biology, Chemistry, Earth Science, Mathematics, or Physics. That design means candidates come to know their subject deeply while learning how to teach it, a balance reinforced by 200 hours of classroom observation beginning in the very first year. The roughly 124 to 127 credit program builds toward a full semester of student teaching for grades 8 through 12. Delivered on campus through the Department of Teaching and Learning, it is approved by the Kentucky Education Professional Standards Board and accredited by AAQEP, so completing it opens the door to Kentucky certification. It is a bachelor's degree in science, technology, engineering, and mathematics (stem) educational methods at the bachelor's level, based in Kentucky.
Why it ranks hereProgram pageIts rank is built from three numbers: graduation rate, admission rate, and in-state tuition, in that order of weight. Its strongest card is completion: a 71% graduation rate lands it in the top 1% of programs nationwide, and since finishing counts for the most, that does much of the work. Admission is close to open access at 93%, so this is a program that bets on teaching students well rather than screening them out. Cost only helps its case: at $12,109 in state, tuition runs below the national median, so students are not paying a premium for those results. That combination is what puts it in the top handful here.
- 2
Hofstra University
60score- 69%Grad rate
- $56,545/yrTuition (in or out of state)
- 68%Admit rate
- 6,581Undergrads
- 1Grads/yr
- 1315SAT mid
- Bachelor of Arts in Science, Technology, Engineering and Mathematics (STEM)
- On-campus
About the programHofstra University's Bachelor of Arts in STEM is a content co-major rather than a standalone teaching degree, designed for undergraduates who are pursuing elementary education at the same time. It pulls coursework from both the College of Liberal Arts and Sciences and the DeMatteis School of Engineering, spanning subjects such as biology, mathematics, physics, and engineering design, all with the goal of giving future elementary teachers a deeper grounding in science and math. Paired with an Elementary Education BA, it supports New York childhood certification for grades 1-6, though the certification itself flows through that elementary degree while the STEM major supplies the subject depth. Students who want a lighter version can instead take an 18-credit STEM minor. The program is delivered on campus. As a bachelor's degree in science, technology, engineering, and mathematics (stem) educational methods, it adds to the bachelor's-level science, technology, engineering, and mathematics (stem) educational methods options in New York.
Why it ranks hereProgram pageIts place on the list comes down to outcomes, selectivity, and price, weighted in that order. Start with the outcome that matters most, 69% of students graduate, top 25% among programs nationwide, which is the biggest reason it sits where it does. A 68% admission rate makes it moderately selective, neither a gatekeeper nor open enrollment. The one drag is price, $56,545 in state, above the national median, so it earns its rank on outcomes rather than affordability. That combination is what puts it in the top handful here.
- 3
Hamline University
45score- 60%Grad rate
- $48,784/yrTuition (in or out of state)
- 88%Admit rate
- 1,806Undergrads
- 1Grads/yr
- 1262SAT mid
- STEM Education (Bachelor of Science)
- On-campus
About the programHamline University's STEM Education Bachelor of Science is built for students who want to teach science or mathematics and appreciate a program that treats those subjects as a connected whole. Housed in the School of Education and Leadership, it asks candidates to choose a concentration in biology, chemistry, mathematics, or physics, then leads to matching Minnesota licenses such as Life Sciences 9-12, Mathematics 5-12, or General Science 5-8. The Saint Paul program keeps a strong practical thread, with a student teaching seminar, a full semester of student teaching, and clinical placements in Minneapolis-area schools. It also rewards curiosity early, letting students begin faculty research in their first year. For those looking further ahead, a pathway toward Hamline's Master of Arts in Teaching is available. This program offers a bachelor's degree in science, technology, engineering, and mathematics (stem) educational methods in Minnesota.
Why it ranks hereProgram pageThe ranking rewards programs that graduate their students, stay at least somewhat selective, and keep tuition reasonable, so here is how this one measures up. On completion, the heaviest factor, it lands mid-pack among programs nationwide at 60%, solid without being a standout. Admission is close to open access at 88%, so this is a program that bets on teaching students well rather than screening them out. The one drag is price, $48,784 in state, above the national median, so it earns its rank on outcomes rather than affordability. Strong on the measures that matter most, it earns a place near the top.
- 4
Central Washington University
40score- 54%Grad rate
- $7,231/yrIn-state tuition
- $25,340/yrOut-of-state tuition
- 91%Admit rate
- 10,317Undergrads
- 20Grads/yr
- Bachelor of Arts in STEM Teaching Program
- On-campus
About the programCentral Washington University designs its Bachelor of Arts in the STEM Teaching Program for students who want to know their subject deeply, requiring a full second major in a science or mathematics field such as biology, chemistry, or mathematics. That pairing shapes the endorsement each candidate earns, from Biology or Physics to Secondary Mathematics for grades 5-12 or Middle-Level Math and Science for grades 4-9. Housed in the College of the Sciences, the program treats content knowledge and teaching skill as equally important. Practicums in nearby middle and high school classrooms start early and grow steadily, so candidates are working with real students long before they lead a room of their own. The experience culminates in a full quarter of student teaching in the final year, ending in Washington state teaching certification. It is a bachelor's degree in science, technology, engineering, and mathematics (stem) educational methods at the bachelor's level, based in Washington.
Why it ranks hereProgram pageIts place on the list comes down to outcomes, selectivity, and price, weighted in that order. The sticking point is completion, the factor we weigh most heavily: at 54% the graduation rate trails the national median, which caps how high it can climb. Admission is close to open access at 91%, so this is a program that bets on teaching students well rather than screening them out. Cost only helps its case: at $7,231 in state, tuition runs below the national median, so students are not paying a premium for those results. Together, that is one of the strongest profiles on the page.
- 5
Wayland Baptist University
40score- 19%Grad rate
- $22,054/yrTuition (in or out of state)
- 56%Admit rate
- 2,087Undergrads
- 10Grads/yr
About the programWayland Baptist University prepares undergraduate teacher candidates through its Don A. Williams School of Education, with a secondary certification pathway in science and mathematics content areas. The program pairs subject-area study in the sciences and mathematics with professional education coursework and a semester of clinical teaching in schools. Completing it leads to Texas teacher certification for the classroom. It is a bachelor's degree in science, technology, engineering, and mathematics (stem) educational methods at the bachelor's level, based in Texas.
Why it ranks hereProgram pageThe ranking rewards programs that graduate their students, stay at least somewhat selective, and keep tuition reasonable, so here is how this one measures up. The sticking point is completion, the factor we weigh most heavily: at 19% the graduation rate trails the national median, which caps how high it can climb. A 56% admission rate makes it moderately selective, neither a gatekeeper nor open enrollment. Tuition is middle of the road for programs nationwide at $22,054 in state, so cost neither helps nor hurts its standing. Strong on the measures that matter most, it earns a place near the top.
How we rank
Each program is scored 0 to 100 against the other programs in its specialty: graduation rate (50%), selectivity by admission rate (30%), and affordability by in-state tuition (20%). Scores are percentile-based within the specialty, so they compare like with like. A program missing a field gets the neutral median for it, so it is neither rewarded nor punished. Earnings are intentionally excluded: federal per-school earnings are not yet published for education programs, and the field-level salary figure is identical for every school, so ranking on it would be meaningless. To keep the overall list from being dominated by a single state's public-university system, it shows at most 2 programs per state; the value, affordability, graduation-rate, and selectivity pages rank every program without that limit.
- Graduation rate: 50%
- Selectivity (admission rate): 30%
- Affordability (in-state tuition): 20%
How much a bachelor's in Science, Technology, Engineering, and Mathematics (STEM) Educational Methods program costs
Published in-state tuition across the 5 ranked bachelor's programs typically runs from $7,231 to $56,545 a year, with a median near $22,054. Most of that spread is public versus private: public universities charge state residents the least, while private colleges set a single sticker price that applies to everyone. 2 of the 5 programs here are public, which is usually where the lowest in-state numbers come from.
Sticker price is rarely what a student pays. Grants and scholarships lower the net cost, and future teachers have aid written specifically for them: the federal TEACH Grant provides up to $4,000 a year to students who agree to teach a high-need subject in a low-income school, and many states add service scholarships and loan-forgiveness programs for people who commit to the classroom. Two costs to watch are out-of-state tuition, which at public schools often runs two to three times the resident rate, and mandatory fees and living expenses, which the tuition figure leaves out entirely.
Sources: tuition and program data from IPEDS; the TEACH Grant from Federal Student Aid.
How to get licensed to teach with a bachelor's in Science, Technology, Engineering, and Mathematics (STEM) Educational Methods
A bachelor's in Science, Technology, Engineering, and Mathematics (STEM) Educational Methods program prepares you academically, but teaching in a public school also requires a license issued by the state where you work. Every state runs its own credential, yet the path rhymes almost everywhere. You complete a state-approved preparation program, log supervised field experience that builds to a full term of student teaching, and pass one or more licensure exams, then apply to the state with a background check and, in most places, complete a mentored first year before the license becomes fully clear and renewable.
The exams are where states differ most. 37 of the 52 US jurisdictions use ETS's Praxis series to test basic skills and subject knowledge; the rest run their own, such as California's CBEST and CSET or New York's NYSTCE. A growing number also require a performance assessment like edTPA, in which candidates submit video and written evidence from their own student teaching. The grade-band and subject endorsements on your license, elementary versus a specific secondary subject, are set by the tests you pass and the program you complete.
Because the specifics are decided state by state, where you plan to teach matters as much as where you study. Licenses do not transfer automatically, though most states honor an out-of-state credential through interstate reciprocity, usually with some added coursework or testing. Check your target state's department of education for its exact requirements before you enroll.
Sources: licensure requirements from each state's department of education; the Praxis series from ETS; edTPA; programmatic standards from CAEP.
How does accreditation work in 2026 for a bachelor's in Science, Technology, Engineering, and Mathematics (STEM) Educational Methods?
Two different things get called accreditation, and only one of them gets you licensed. Institutional accreditation comes first: a regional accreditor such as SACSCOC, the Higher Learning Commission, or the Middle States Commission reviews the whole university, and it is what lets credits transfer and federal financial aid flow. Any college worth considering has it, but on its own it says nothing specific about the quality of the education program.
Program, or programmatic, accreditation is the education-specific layer. The national accreditor is CAEP, the Council for the Accreditation of Educator Preparation, formed in 2013 when the two older bodies, NCATE and TEAC, merged; AAQEP is a newer alternative that a growing number of programs have adopted. A CAEP or AAQEP seal signals that the preparation program has been reviewed against national standards for clinical practice, content knowledge, and candidate outcomes.
The credential that actually licenses you, though, is state program approval. A state only allows its approved programs to recommend graduates for certification, so approval, not a national seal, is what turns your degree into a license, and it is also what makes interstate reciprocity possible. Plenty of strong programs carry state approval without a separate national accreditor, which is common and not a red flag. When you compare options, confirm two things: that the school is regionally accredited, and that the specific program is approved by the state where you intend to teach.
Programmatic accreditor: CAEP. State approval is granted by each state's department of education.
Ways to earn your bachelor's in Science, Technology, Engineering, and Mathematics (STEM) Educational Methods
A traditional four-year, on-campus bachelor's is the most common route into teaching, and for good reason: the degree leans on in-person field placements that build to a full term of student teaching. Most programs here are delivered on campus for exactly that reason.
You do not have to start at a four-year school. Many students spend their first two years at a community college, earn an associate's, and transfer in, which trims the cost of the early coursework, and statewide articulation agreements often guarantee the credits apply. If you already hold a bachelor's in another field, you can usually skip a second degree entirely and enter through an alternative-certification program or a master's-with-licensure route built for career-changers.
Whatever the format, the non-negotiable is supervised clinical practice. Every licensure-track program includes a student-teaching placement, and some now pair it with a paid, year-long residency alongside a mentor teacher, an increasingly common model that eases the unpaid-semester crunch traditional student teaching can create.
Sources: online and program counts from IPEDS; alternative-certification pathways per the US Department of Education.